Specs
Z254 ZERO TURN DTC (Kawasaki) SKU: 970 72 98‑02 | |
|---|---|
| Capacity | Z254 ZERO TURN DTC (Kawasaki) SKU: 970 72 98‑02 |
| Cutting width | 54 in |
| Speed forward min | 0 mph |
| Speed forward max | 6.5 mph |
| Emission | |
Exhaust emissions (COâ‚‚ EU V)2 | 792 g/kWh |
| Cutting deck | |
| Cutting methods | 3-in-1 Mulch/Rear Bag/Side Discharge Capable |
| Deck thickness | 12 gauge |
| Deck Wash Port | Yes |
| Greasable mandrels | Yes |
| Nose roller | Yes |
| Powder-coated cutting deck | Yes |
| Spindle/mandrel type | Cast Aluminum |
| Deck lifting system | Manual, hand operated |
| Cutting height steps | 6 |
| Cutting deck type | Stamped vented deck system |
| Anti-scalp wheels | 4 |
| Blade engagement | Electric clutch |
| Blades | 3 pcs |
| Cutting deck material | Steel |
| Cutting height, min (approximate) | 1.5 in |
| Cutting height, max (approximate) | 4 in |
| Dimensions | |
| Weight | 593 lbs |
| Base machine, height (ROPS down) | 40 in |
| Base machine, height (ROPS up) | 40 in |
| Base machine, height | 40 in |
| Base machine, length | 75 in |
| Base machine, width (chute down) | 67 in |
| Base machine, width (chute up) | 56 in |
| Drive system | |
| Transmission manufacturer | Hydro-Gear |
| Transmission type | Hydrostatic |
| Engine | |
| Engine name | FR Series |
Engine Power (As rated by the engine manufacturer)1 | 23.1 hp |
| Cylinder displacement | 44.3 cu.inch |
| Air filter type | Paper |
| Cylinders | 2 |
| Engine cooling | Air |
| Engine lubrication type | Pressure |
| Fuel tank location | Side (Single) |
| Fuel tank volume (with reserve) | 3.5 gal (US) |
| Motor/engine manufacturer | Kawasaki |
| Oil filter | Yes |
| Equipment | |
| Seat type | 15" high back |
| Cup holder | Yes |
| Hinged armrests | Optional |
| Hour meter type | Digital with pre-programmed service intervals |
| ROPS | No |
| Seat back height | Medium |
| Seat material | Vinyl |
| Control | |
| Connectivity | Not applicable |
